Shore Conn. Panel
- Emission
- Fuel Supply System
- Measurement & Control
- Measurement & Control
Eco-friendly Solution
- Customer Service
- Chat Bot
- Partner Company Registration
- Service Networks
Customer Support
We’re Panasia
- About
- Eco-friendly Solution
- MRO
- Customer Support
- Media
- ESG
AMP
- Eco-friendly Solution
- AMP
Go to
Catalog
Alternative Maritime Power
Product Overview
AMP(Alternative Maritime Power) is a system that enables
vessels to receive electrical power from onshore sources
while at a berth, allowing auxiliary engines to be shut down.
By switching to shore power, ships can reduce fuel consumption and significantly
lower air pollution from exhaust gases.
Features
- Enables real-time automatic cable tension control using an encoder
+ inverter control system - Easy maintenance with no components requiring periodic replacement
Main Components
AMP Receiving Panel
Socket Box
Transformer
AMP System Application
-
Fixed Cable Reel Type
- Generally applied to Container vessel
- The AMP cable management system (Cable Reel) is located onboard ship.
- Two parallel cables with three pilot conductors each shall be used for HVSC systems up to a maximum power demand of 7.5 MVA.
- Nominal voltage : 6.6kV
-
Socket Box Type
- Generally applied to Ro-Ro, Tanker, LNGC, Cruise
- The AMP cable management system is located ashore.
- The number and specifications of AMP cable sockets shall be applied differently for each type of ship.
- Nominal voltage : 6.6kV or 11kV
-
Single Fixed Type
- Generally applied to Container vessel
- The AMP cable management system (Cable Reel) and the Shore Connection Panels are installed in a 40ft H/C container which will be installed fixedly on the port or st’bd side of the ship.
- Two parallel cables with three pilot conductors each shall be used for HVSC systems up to a maximum power demand of 7.5 MVA.
- Nominal voltage : 6.6kV
-
Dual Fixed Type
- Generally applied to Container vessel
- The AMP cable management system (Cable Reel) is installed in a 40ft H/C container which will be installed fixedly on both side of the ship.
- Two parallel cables with three pilot conductors each shall be used for HVSC systems up to a maximum power demand of 7.5 MVA.
- Nominal voltage : 6.6kV
